I2C Manager

I2CManager Class

The I2CManager class provides methods to manage I2C communication with slave devices.

Methods

• open:

  Opens the I2C bus.

  Parameters:

  • bus (Optional[int]): The I2C bus number to open (default is 1).

• close:

  Closes the I2C bus.

• write_byte:

  Writes a single byte to the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  • data (int): The byte to write.

• block_write_byte:

  Writes a single byte with a command to the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  • command (int): The command to send.

  • data (int): The byte to write.

• read_byte:

  Reads a single byte from the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  Returns: - (int): The byte read.

• block_read_byte:

  Reads a single byte with a command from the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  • command (int): The command to send before reading.

  Returns: - (int): The byte read.

• write:

  Writes data to the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  • data (bytes): The bytes to write.

• block_write:

  Writes data with a command to the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  • command (int): The command to send.

  • data (bytes): The bytes to write.

• read:

  Reads data from the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  • length (int): The number of bytes to read.

  Returns: - (bytes): The bytes read.

• block_read:

  Reads data with a command from the I2C slave device.

  Parameters:

  • addr (int): The I2C slave address.

  • command (int): The command to send before reading.

  • length (int): The number of bytes to read.

  Returns: - (bytes): The bytes read.

• write_read:

  Performs a write followed by a read operation.

  Parameters:

  • addr (int): The I2C slave address.

  • write_data (bytes): The bytes to write.

  • read_length (int): The number of bytes to read.

  Returns: - (bytes): The bytes read.

• block_write_read:

  Performs a block write followed by a block read operation.

  Parameters:

  • addr (int): The I2C slave address.

  • command (int): The command to send.

  • write_data (bytes): The bytes to write.

  • read_length (int): The number of bytes to read.

  Returns: - (bytes): The bytes read.